Building your first PC? 5 essential tips that’ll ensure success

It’s 2024, which means building your own PC is only one step harder than assembling a semi-complex LEGO set. Most parts fit together in intuitive ways, and a lot of the guesswork is eliminated if you use helper tools like PCPartPicker to ensure compatibility and stay within your budget.

Of course, there’s no shame in buying a prebuilt desktop PC. But if you fancy yourself a tinkerer and you don’t mind getting a little hands-on, then there are several benefits to building your own PC, including the fact that you can build a powerful rig while saving a lot of money.

But there are a few tips, warnings, and caveats that you should keep in mind before you dive into your first PC build.

Tip #1: Watch a few YouTube builds first

Thorough preparation starts with watching others build their own PCs from start to finish. This is an important step as it allows you to familiarize yourself with the process and know what to expect.

Pay particular attention to PC build videos that involve the CPU brand and/or CPU generation for the exact PC housing you have in mind. This will help you to understand the specific challenges and technologies that are relevant for your own computer.

On our own YouTube channel, we have a long but detailed live video walkthrough that’s meant for beginners who have never assembled a PC before. Watch as we go through the PC building process:

Tip #2: Avoid static electricity

Static electricity may not seem so dangerous, but it can cause unexpected damage when it comes to delicate computer parts. You don’t want to accidentally fry your motherboard during installation!

That’s why you need to prevent static electricity at all cost. One way to do that is by wearing an anti-static wristband, which will redirect any static buildup away from your PC before it can cause harm. (Experts can get away without it, but we recommend that first-timers wear one.)

Also, never assemble a PC on carpet and avoid doing the actual building on notably dry days because both carpets and dry air can exacerbate the risk of static electricity. However, if you must build, you can discharge static buildup by regularly touching any exposed metal part of your PC case every time before you touch any hardware component.

Tip #3: Insert the CPU with extra care

Most steps in the PC building process are straightforward with minimal risk, but there’s one step that can be particularly nerve-wracking: the insertion of the CPU into the motherboard socket.

You’ll likely need to use a bit of force to get it in — and it might even seem like you’re going to snap your motherboard. Of course, make sure you’re actually aligned properly; once you are, be calm and confident as you slot the CPU into its socket. It’s easy, just unexpectedly tight.

So, take it slow and be mindful. A mistake while installing a $500 CPU can be financially painful, annoying, and disappointing. Refer back to Tip #1 and watch a few builds to see how it’s done.




Inserting the CPU into the motherboard is ultimately mundane, but be careful because a mistake here could be costly.



Inserting the CPU into the motherboard is ultimately mundane, but be careful because a mistake here could be costly.IDG

Inserting the CPU into the motherboard is ultimately mundane, but be careful because a mistake here could be costly.IDG


IDG

Tip #4: Keep it simple your first time

One of the benefits of building your own PC is that you can bling it out however you want. Get a fancy case, throw in a closed-loop cooling system, and deck it out with RGB lighting, right? All of that might be impressive, but it complicates the build considerably.

You have to learn to walk before you can run. In this case, that means starting with a basic build and making sure you’ve gone through the whole process (maybe even a few times) before you try any complex configurations. Don’t bite off more than you can chew.

Tip #5: Practice good cable management

Good cable management may not affect the performance of your PC, but it does help to keep everything neat and tidy — especially if your PC case has any transparent sides.

More importantly, good cable management helps you stay organized as you move through the building process, ensures good airflow when everything is finished, and makes it a lot easier to take parts out and replace them with upgrades in the future.

With these essential PC building tips under your belt, you can confidently pursue your first PC build and know that it’ll be a fun, rewarding, and successful experience. Good luck!

Further reading: Is building your own PC worth it?