Navigation
Recherche
|
Vanguard Audio Labs V14 Variable-Voltage Tube Condenser Microphone
vendredi 16 août 2024, 20:33 , par Gearslutz
Vanguard Audio Labs' V14 VARIABLE-VOLTAGE TUBE CONDENSER
Vanguard Audio Labs is proud to present the V14 Tube Condenser Microphone – designed to be a versatile, reliable, professional tool that seeks to improve upon the highly-sought-after vintage Austrian-made condensers of yesteryear. The V14 is the single capsule sibling of Vanguard Audio’s lauded V24 Dual-Capsule Stereo Tube mic. The V14 features a BeesNeez CK12 Capsule, vintage GE 6072A tube, 9 polar patterns, 3 switchable voicings, and a unique “Variable Voltage” control that can starve or drive the tube voltage, creating even more tonal colors. With our premium cryogenically-treated tube circuitry, Neutrik® interconnects, US-made audiophile-grade resistors, Cinemag® transformers, SKB waterproof Mil-Standard case, and a VLSM shockmount, the V14 is the finest example of an updated legacy tube condenser available at any price. Hand-made in small batches in the USA, this is the definitive modern tube microphone and will be the crown jewel of any mic locker. SO WAIT…IS IT A CLONE? We did not set out to make a “clone”, “homage”, or “tribute” to some of the most beloved Austrian microphones of yesteryear. Rather, we used the basic circuit topology and improved upon it in as many ways as we could. This includes: Variable Tube Voltage control for starving or driving the tube beyond nominal, creating even more unique voicings 3 Selectable Voicings for a “12”-, “251”-, or “ribbon”-style high end, giving the engineer more tonal options A modernized power supply with extra filtering stages and integrated polar pattern switching for lower noise and reliable operation Improved noise filtering along the capsule and power paths for reduced noise floor Extended low frequency response with a better transformer design and component value changes, allowing full-bodies capture of any source Modernized components, including US-made audiophile-grade low-noise resistors, high-end capacitors, Cinemag® transformer, sealed microphone switches, and deep-cycle cryogenic treatment of the majority of the componentry WHAT THE HECK IS "VARIABLE VOLTAGE CONTROL"? We’ve added a switch on the power supply that sags or over-supplies the tube. You could think about it like Eddie Van Halen’s “brown sound”, but for a mic. We believe this is a world first for a microphone (although more knowledgeable pro audio historians may prove me wrong!) A typical mic with this style of single-triode circuit will operate the tube between 65-80V. With the Variable Voltage Control located on the power supply, you can adjust the tube’s plate voltage between 34-105V. This changes the parameters of how the mic operates: Total Harmonic Distortion Transient Response/”headroom” Frequency Response Output Level This makes the V14 even more versatile, allowing the engineer to find settings for ideal musicality. We’ve noted the “standard” operating points with larger marks on the power supply so you can use the mic at it's traditional operating point. We laser-engrave a handy chart on the bottom of the PSU for the engineer's quick reference, and the makeup gain required is listed on the switch positions to keep your levels optimal. Oversupplying the tube will increase 3rd-order harmonic distortion, as well as increase output level. Undersupplying the tube will increase 2nd-order harmonic distortion and reduce output level, as well as reduce “headroom” and change the way the mic reacts to transients. DESIGN Every great microphone starts with a great capsule. After much consideration, we chose the BeesNeez CK12 capsule for the V14. These Australian-made beauties are manufactured using modern automated CNC machining and Ben is extremely knowledgeable of the original CK12s, and a true master machinist. One of the most complex (and revered) capsule designs ever conceived, the CK12 is the beating heart of some of the most hallowed vintage microphones. This capsule is set within our Vanguard Audio Labs chassis platform, with an open-weave headbasket for low internal reflections and a natural sound. The Cinemag® transformer emulates the properties of the famed “T14” transformer found in vintage Austrian microphones, but uses a larger core to obtain better low end response along with higher-quality alloys and precision windings. For the V14, we spared no expense finding premium-grade, over-spec components sourced from manufacturers around the world. We cryogenically treat the majority of components, including a hand-selected vintage GE 6072A "triple mica" tube. We chose to use US-made, low-noise, precision-spec, audiophile-grade resistors. Each circuitboard is populated and soldered by hand in our California workshop. Aesthetically, the precision-machined stainless steel body is hand-polished to a #4 grained finish by our expert vendor in California. The power supply chassis are laser-cut by our machinist in Pennsylvania. Your V14’s serial number is laser-engraved on the lower rear of the microphone in our workshop. Performance We designed the V14 with the character of vintage Austrian-made microphones in mind, while also utilizing modern technology & design to meet the demands of today’s recording professionals. The historically-accurate CK12 capsule is switchable via the power supply between 9 different polar patterns. On the rear of the microphone is a 3-way switch which offers 3 different microphone voicings – Flat – an untouched signal flows straight from the tube to the output transformer. “251 rolloff”, a switchable capacitor which gives that famous Telefunken model its signature top end. “ribbon” style, giving a thicker, warmer sound. The PS-14 power supply is built like a tank and designed from the ground up to provide clean, consistent power with no drift. QUALITY The V14 is designed and built in the USA, and undergoes final assembly in sunny Southern California. The PSU chassis is bent locally. We are assembling every unit by hand – every last solder joint and screw. We perform 100% quality control – every single piece of your microphone kit undergoes a series of stringent audio and visual tests in Southern California before being hand-packed. Every component of the V14 was designed to be robust and reliable. Wherever possible, components were over-specced. The deep-cycle cryogenic treatment improves the lifespan and performance of critical electronic components. Each microphone component is built from stainless steel. Every Vanguard microphone is backed by our FIVE-YEAR WARRANTY. Features, Design & Performance 3 Switchable Voicings - The V14 has a switch for the famous "251" high-end rolloff to emulate those hallowed microphones' respective top end response, as well as a "Ribbon" mode for a warmer, thicker sound. 9 independently switchable polar patterns World's First Variable Voltage Selector - tune in your tube's harmonic distortion levels by boosting or reducing the input voltage. BeesNeez CK12 Capsule - a modern recreation of the most revered capsule of all time, handbuilt in Australia Open-weave headbasket for low internal reflections and “open-air” voicing CAPSULE & ELECTRONICS BeesNeez CK12 historically-accurate capsules handmade in Australia 9 independently selectable polar patterns at the power supply Cinemag® T14 transformer Hand-selected 6072A tube Transformer-balanced tube circuitry using audiophile-grade parts, sourced from USA, Germany, Japan, France, and more Deep-cycle cryogenic treatment of the majority of components Ultra-low-noise design using PRP® audiophile-grade precision resistors CONSTRUCTION Heavy-duty SUS304 Stainless Steel construction, with locally machined components Laser-Cut Stainless Steel Power Supply, made in Pennsylvania Laser-engraved microphone and PSU markings #4 grained hand-polished Stainless Steel finish Precision-cast Vanguard badge Neutrik® interconnects throughout Made in USA & 100% Quality Control in California, USA 5-Year Warranty INCLUDED ACCESSORIES PS-14 Power Supply Padded Pinewood Microphone Box VLSM Large Shockmount with aerospace-grade suspension rings SKB i-Series Mil-Standard Waterproof Carry Case with Custom-Routed Foam Insert 7-pin Microphone Cable with Neutrik™ connectors IEC Power Cable Specs all listed specs are for the V14 set at its "ideal" tube operating voltage.Transducer Type: Condenser Capsule: BeesNeez CK12, built in Australia Finish: hand-polished #4 grained finish Electronics Type: Vacuum Tube, Transformer-Balanced output Output Impedance: 200Ω Max SPL: appx. 126dB @ 0.5% THD (normal mode) Frequency Response: 20Hz-20000Hz Equivalent Noise Level: ≤13dBA (A-weighted) S/N Ratio: ≥81dB (Ref. 1Pa A-weighted) Sensitivity: -41dB @ 1kHz (9mV/Pa) Output Connector: Male XLR 7-pin, gold-plated Diaphragm Size: 1.04″ / 26.4mm Dimensions: 8.2″ long, 2.05″ diameter / 208mm long, 52mm diameter Voltage Requirement: PS-14 power supply can operate between 110V-240V, selectable at rear PRICE: $4,999 Our First Edition production run is limited to 10 UNITS and will include some extra goodies, including a modern secondary tube, extra cryogenic treatment, and more. More info at www.vanguardaudiolabs.com/v14
https://gearspace.com/board/new-product-alert/1433546-vanguard-audio-labs-v14-variable-voltage-tube-...
Voir aussi |
126 sources (21 en français)
Date Actuelle
jeu. 21 nov. - 12:01 CET
|