MacMusic  |  PcMusic  |  440 Software  |  440 Forums  |  440TV  |  Zicos
original
Recherche

Pynamic 4062 PWM Compressor 2U RACK

lundi 7 octobre 2024, 02:10 , par Gearslutz
On the back of the hugely successful Pynamic500, we’ve brought the same beautiful sound to a deluxe rack format complete with stepped switches throughout and 3 selectable Hi-Pass frequencies.

www.pynamic.com.au

The Sound
Original PYEs were renowned for their rich, gluey sound making them perfect for mixing anything from guitars to snares to bass.
The Pulse Width Modulation compression type is quite rare and is very unique sounding.
It behaves like thinning scissors, removing material from the waveform at 250 kHz intervals based on the ratio and release settings. It can go from very usable aggressive pumping compression to light transient shaving all very transparently.
It shines particularly on Toms, Drum Bus, Acoustic guitars & Piano (its our go to on acoustic guitar and toms)

Not a VCA, FET, diode or VariMu, the Pynamic is the perfect addition to your dynamics options!

The Design
Stepped switches throughout brings precision and recall-ability.
The inclusion of 3 selectable Hi-Pass frequencies for the side-chain brings even more flexibility to tone shaping, allowing you to dial in how much bass or kick is triggering the compression.
The stereo link button allows the compressor to link the Ratio, Attack and Release settings between both channels. Alternatively the unit can be used in dual mono mode, for example Kick on channel 1 and Snare on channel 2. The addition of an LED indicator lets the user know when the 4062 is in LIMIT mode.

Features
-All stepped switches for precision and recall
-Dual mono or linked stereo operation
-3 selectable High Pass Filter sidechain frequencies
-Stereo link button to link settings for stereo use
-LED indicator when LIMIT mode is engaged
-Original Ratio & Release settings on stepped switches
-Pro audio quality Input and Output transformers
-Built with the highest quality discrete components, NO ICs!
-Handmade original inductors for the PWM compression circuit
-Provides the full voltage of the original circuit
-Faithful recreation of the original

Tech Specs
-Ratios: 1:1, 2:1, 3:1, 5:1, 20:1 (limiter)
-Comp Attack: < 0.5ms original speed (fast) up to 50ms (slow)
-Limiter Attack: 1ms original speed (fast) up to 100ms (slow)
-Release: 100ms, 200ms, 400ms, 800ms, 1600ms, 3200ms
-Sidechain High Pass Frequencies: 40, 80, 120 (Hz)
-Bypass switch: True Bypass
-Noise Floor: -80dB
-Distortion: < 1% @ 30hz, 100hz, 1k, 10k
-Max Current: -20VDC @ 250mA
https://gearspace.com/board/new-product-alert/1436095-pynamic-4062-pwm-compressor-2u-rack-new-post.h

Voir aussi

News copyright owned by their original publishers | Copyright © 2004 - 2024 Zicos / 440Network
126 sources (21 en français)
Date Actuelle
dim. 22 déc. - 02:53 CET