|
Navigation
Recherche
Top: Gearslutz
|
Audio Pro > Gearslutz
jeudi 14 novembre 2024, 09:46
I put this in geek squad too but figured someone here might know the answer: Hi guys I have a bad h910. I got the output to work but the infamous mn5280d ic’s are bad. Chat gbt said I could possibly use MN5280N as it has a similar 4906 bit dynamic ram in a dip-22 package. ...
Hi guys I have a bad h910. I got the output to work but the infamous mn5280d ic’s are bad. Chat gbt said I could possibly use MN5280N as it has a similar 4906 bit dynamic ram in a dip-22 package. Are they truly compatible? What do I do here? I’m lost cause these chips...
K-2 has a lot of pitch instability in its lower bass notes. This is obvious when you try to tune the oscillators and there's constantly about +-5 cents of movement in the frequency of the oscillator. This is a bit sad as it makes K-2 unsuitable for the lowest bass note...
In the olden times, barring a specific reason to record the stereo out of a synth, it was common to record them in mono…. Again, not for every scenario, but most of the time What’s the workflow like for yall doing this ITB with soft/VSTi synths? Render the stereo and...
Pardon my ignorance on this topic. I’ve encountered microphonic tubes in guitar amps before and am aware of the tap test, but curious if the following is normal behavior. I was mixing into my ZOD DI’s today and noticed more harmonic content than usual. I was confused...
I am having trouble with my beloved NewWave chorus and Jackson Audio CS is, so far, really bad. I love the sound of stereo buckets on the New Wave; the Rack Mode with Solina LFO waves is AMAZING on my stereo and mono output synths; unfortunately, switching between stereo and ...
Hi guys! I just wanted to ask you for some recommendations on headphones for mixing and production, I was looking for the best possible option specifically in terms of brands and models in of mid-range or mid-high range due to budget limitations. The only thing I know about...
Access Four Hit-Boy Plugins with Romplur's free trial: www.romplur.com WATCH VIDEO https://youtu.be/VGSLwtGGqgA?si=9G4VAtTPO_4-6Nbm Grammy Award-winning producer Hit-Boy, known for his work with musical icons such as Jay-Z, Nas, and Kanye West, has teamed up with Romplur,...
Reflex Acoustics has released the Reflex Limiter: a free, lightweight limiter you can use anywhere. The Reflex Limiter is designed to transparently control the peaks in your signal, while remaining light enough on CPU that you can use it multiple times in your project. The ...
I have a pair of 8020c monitors and I’m thinking of adding a subwoofer. The one from genelec is at least 900 dlls, there are other from for example jbl or Yamaha which are considerably less expensive. My questions is that, is it really worth it to buy the one from genelec...
I love me some Vance, but I have no idea what he's talking about here. I mean, I do, but whaaaat?
Building new (and not crappy like the original) cables for a friend's set of MA-200. Mogami W3172 for wire, Neutrik Black/Gold for connectors. Problem is that the two original cables I have (came with the mics) are completely different as far as color-codes go and one has...
...and it gets an official Quantec plugin (!), plugin search, and draggable mixer channel strips! (Note: Requires macOS Sonoma 14.4 or later.) Quantec Room Simulator • Access the only authentic hardware recreation available as a plug-in, built using the original...
The best to everyone! Reface CP control with an additional controller. Am I doing something wrong, or is this a limitation from Yamaha? My Reface CP receives what I need from the main keyboard, and everything would be fine if I wasn't going to change types (sounds) from an ...
mercredi 13 novembre 2024, 22:49
Dear Behringer Solina fellows, I got one of the Behringer Solinas when they were first released, and always felt like something's missing. I had a vintage Solina two decades ago and its ensemble chorus somehow sounded more warbly and throbbing, there was more movement and a...
Looking to get into a bit of atmos tinkering...atmos renderer is 249........Logic Pro with atmos is included is 199.......anyone know if there is any difference....?? I get a DAW with atmos for less than the atmos renderer...?? Just bounce the stems into logic is all I...
My Focusrite Saffire Pro 40 goes into this loop of what I believe is switching bit rates when I launch a program like Vegas, or Cakewalk or Discord for example on a Win 10. The looping is accompanied with a popping sound (not heard in this video) Sometimes it does that for...
What Is your favourite vintage Filter of all time? What has been your most favourite filter of modern synths?
|
126 sources (21 en français)
Date Actuelle
jeu. 21 nov. - 10:00 CET
|
